The Flyability Elios, is the only collision tolerant survey grade drone technology on the market, with a built-in thermal camera and working temperature capabilities of between 0ºC & 50ºC. The Elios is a ideal solution for your confined space inspections
Confined space and hazardous close quarter inspection procedures can run into hundreds of thousands in lost revenue inclusive of outage time. There is a huge gap in the market to adopt remote survey techniques, allowing thorough vessel inspection or storage tank survey.
The external remote survey market using drone technology is already being used across several industries, with the ability to capture far superior data and cover greater ground at much faster periods of time than traditional manned inspection methods.
Internal inspection procedures such as tank or vessel inspection and boiler survey were up until recently lacking the technology and the ability to achieve results from remote survey and inspection techniques. These inspections were and still are covered utilising traditional scaffold, rope access personnel etc.
Vessel inspection and tank survey play one of the most important parts in several industries, considering these pressure vessels are situated in the heart of most sites and if not correctly inspected could pose disastrous consequences. However the maintenance costs combined with outage time currently eats away at profit margins during regular manned inspection periods.
DJM Aerial Solutions are now looking to change this with their new fleet addition the Flyability Elios.
The Flyability Elios
DJM Aerial Solutions one of the UK’s leading drone companies have recognised the requirement for remote confined space inspection and vessel surveys using remote technology and decided to invest in the Fyability Elios, to allow them a share of this relatively new market. The Flyability Elios is a market leading remote inspection survey grade UAV developed around the requirement for internal space such as pressure vessel and storage tank inspections. But its actual usage is only governed by imagination. Already adopted by the mining industry and emergency services to assess the levels of danger prior to entering a space and currently huge success in the power generation sector for boiler inspection and survey. The Elios is an all-round disrupter in itself.
Its collision tolerant outer frame places it above and beyond anything else on the market and is now the recognised standard within industry remote confined space inspection requirements.
“Inspired by the ability of insects to keep their stability after an in-flight collision, the flight concept of the Flyability Elios is the result of hundreds of millions of years of natural evolution. Using a unique and pragmatic approach, Flyability Elios solves the biggest challenges of flying drones indoor in complex and confined spaces or in contact with humans: the risk of collisions and injuries. Privileging tolerance to collisions over the attempt to sense and avoid obstacles, Elios provides the level of reliability that is expected by professionals operating in environments where failure to operate is not an option.”
DJM Aerial Solutions no stranger to the adoption of early technology release by leading drone manufacturers recently invested in the industry-leading Matrice 210. One of the first in the UK to get their hands on the model, they quickly became the go-to company in the North East region for drone-based inspection work that required dual payload configuration such as thermography or long-range RGB, yet again using their fleet of high specification sensors and payloads.
This method of early adoption into this technology has forged a path for DJM allowing them to understand the teething problems experienced with early adoption of new technology and overcome any potential issues that may occur without a problem.
DJM Aerial Solutions experience around industry and their technical background across the board is the key to their strength and ability which is, of course, backed up with their enviable fleet of high specification UAV technology.
Their recent investment in the Flyability Elios now provides them with a competitive edge over other industry drone companies not only in the Teesside and North East Region but also the UK in its entirety and allows them to provide an all-round solution to remote inspection and survey.
Remote Confined Space Inspection
If you would like to speak to us about any remote confined space inspection, drone services or thermal services or to arrange any standard or thermal aerial projects then please either get in touch via this link to our contact page or Call us on +44 (0) 1642 903779 We’d be more than happy to speak to you and go through the process.