Biomass Ducting Inspection Using Elios 3 Drone Technology

Elios 3 Drone Inspection of ACC Air Supply Ducting at the World’s Largest Pellet Fed Biomass Facility

DJM Aerial Solutions recently completed a specialist confined space drone inspection of internal ACC air supply ducting at what is recognised as the world’s largest pellet fed biomass facility, located in Middlesbrough, North East England.

The inspection involved five separate vertical duct systems supplying the site’s enormous Air Cooled Condenser infrastructure. Each duct leg was positioned approximately 40 metres above ground level and was completely inaccessible using conventional inspection methods without significant working at height exposure, scaffold access, or confined space entry procedures.

By deploying the Flyability Elios 3 confined space inspection drone, our team were able to safely navigate each vertical duct structure and conduct a detailed close visual inspection of the internal ducting condition without the requirement for manned access.

The Importance of ACC Air Supply Ducting in Biomass Facilities

Air Cooled Condensers are critical assets within biomass and power generation facilities. Their performance is directly linked to the efficiency of the airflow systems feeding the condenser infrastructure.

Large air supply ducts such as these are subjected to continuous operational stresses, vibration, temperature fluctuation, and environmental exposure throughout the operational life of the plant.

Over time, ducting systems may experience:

Corrosion and coating degradation
Mechanical distortion
Joint movement
Bellows deterioration
Fatigue around seams and interfaces
General structural wear

Any deterioration within these systems has the potential to impact airflow efficiency and overall plant performance.

Routine inspection of ACC ducting infrastructure is therefore essential for supporting preventative maintenance strategies and maintaining operational reliability.

Significant Access Challenges

The project involved inspection of five vertical duct structures feeding the ACC system.

Each duct leg extended approximately 40 metres vertically and presented substantial access challenges for traditional inspection methods.

The internal geometry and elevated positioning of the ducts meant that conventional access would likely have required:

Extensive scaffold erection
Confined space entry teams
Working at height procedures
Temporary access systems
Rescue team support
Permit controlled access activities
Operational restrictions during inspection works

The cost, planning requirements, and safety exposure associated with these methods would have been considerable.

Additionally, achieving close visual inspection coverage of all internal seams and interfaces would have introduced significant logistical complexity.

Confined Space Drone Inspection Solution

To overcome these challenges, DJM Aerial Solutions deployed the Flyability Elios 3 confined space inspection drone.

The Elios 3 platform is specifically designed for operation within complex industrial environments and GPS denied confined spaces where conventional drone systems cannot safely function.

Its collision tolerant carbon fibre cage allows the aircraft to safely interact with surrounding structures while maintaining stable flight within restricted environments.

The platform also incorporates:

High intensity integrated lighting
High resolution visual inspection cameras
Real time live video feedback
Ultra stable flight control systems
Precise manoeuvrability within confined spaces

This capability allowed our inspection team to safely navigate each vertical duct leg while transmitting live inspection footage directly to engineering personnel and the client team.

Inspection Scope

The inspection programme focused on conducting detailed close visual inspection of the internal ducting condition throughout all five vertical duct systems.

Particular attention was given to:

Circumferential seams
Longitudinal seams
Expansion bellows
Internal structural interfaces
Evidence of corrosion or coating degradation
Mechanical damage or distortion
General condition of the internal duct walls

Using the Elios 3 drone, the team were able to manoeuvre accurately throughout each vertical duct structure and capture high resolution imagery of critical inspection areas.

The ability to hover precisely within the ducting enabled detailed visual assessment of seams and bellows without requiring personnel to physically enter the confined environment.

Benefits of Drone Inspection for Elevated Industrial Ducting

The inspection demonstrated several significant advantages associated with confined space drone technology.

Elimination of Confined Space Entry

The most significant benefit was the complete removal of the requirement for personnel to physically enter the duct systems.

This dramatically reduced safety exposure while simplifying the overall inspection process.

Reduced Working at Height Exposure

Traditional access methods would have required prolonged working at height activities around elevated infrastructure.

Drone deployment eliminated the requirement for extensive manned access solutions.

Rapid Inspection Delivery

The Elios 3 enabled all five duct systems to be inspected within a fraction of the time required for scaffold based access methods.

High Resolution Inspection Data

Detailed visual inspection imagery and recorded footage were captured throughout the survey, allowing engineering teams to remotely assess the internal condition of the ducting infrastructure.

Minimal Operational Disruption

The inspection was completed with significantly reduced disruption to surrounding plant operations when compared with conventional access solutions.

Supporting Asset Integrity and Maintenance Planning

The inspection data captured during the survey provides valuable visual intelligence for engineering and maintenance teams responsible for managing the facility’s asset integrity programme.

Inspection outputs support:

Maintenance planning
Condition trending
Repair prioritisation
Operational reliability assessments
Future outage planning
Long term infrastructure management

Drone inspection does not replace engineering assessment, however it provides high quality visual data that supports informed maintenance decision making and targeted intervention planning.

The Growing Role of Confined Space Drone Technology in Biomass Facilities

As biomass and Energy from Waste facilities continue to increase in scale and complexity, operators are increasingly adopting remote inspection technologies to improve safety, efficiency, and inspection accessibility.

Assets such as:

ACC systems
Air supply ducting
Boiler gas passes
Cyclones and separators
Stacks and flues
Ventilation systems
Pipework infrastructure

often present significant access challenges that can now be addressed safely using confined space drone technology.

The successful completion of this project in Middlesbrough further demonstrates how the Elios 3 platform is becoming an invaluable tool within modern industrial inspection and asset integrity programmes across North East England and throughout the wider UK power generation sector.

Frequently Asked Questions for Industrial Ducting Drone Inspection

An ACC air supply ducting inspection involves assessing the internal condition of the duct systems supplying airflow to an Air Cooled Condenser within a biomass or power generation facility.

ACC ducting plays a critical role in maintaining airflow efficiency and supporting the thermal performance of the Air Cooled Condenser system.

DJM Aerial Solutions used the Flyability Elios 3 confined space inspection drone, designed specifically for navigating restricted industrial environments.

The five vertical duct structures were positioned approximately 40 metres above ground level and were inaccessible without scaffold access, confined space entry, or specialist working at height solutions.

The inspection covered circumferential seams, longitudinal seams, expansion bellows, internal structural interfaces, and general duct wall condition.

Drone inspections reduce working at height exposure, minimise scaffold requirements, improve safety, and allow rapid inspection of multiple assets.

Drone inspection eliminates the need for confined space entry, reduces working at height exposure, minimises operational disruption, and significantly reduces inspection time.

Yes. The Elios 3 is specifically designed for stable flight within confined, GPS denied industrial environments and incorporates a collision tolerant protective cage.

Drone inspections can identify corrosion, coating degradation, seam deterioration, bellows damage, structural distortion, mechanical wear, and other signs of asset deterioration.

No. Drone inspection provides high resolution visual data that supports engineering evaluation and maintenance planning.

Biomass facilities, Energy from Waste plants, petrochemical infrastructure, manufacturing sites, and conventional power generation facilities all benefit from confined space drone inspection technology.

Supporting Safer Inspection Strategies

The inspection of these elevated ACC air supply ducts highlights how advanced drone technology is helping industrial operators reduce risk while improving visibility of critical infrastructure.

By combining high resolution visual inspection capability with safe remote access, operators gain improved visibility of difficult to access assets while reducing downtime, minimising working at height exposure, and eliminating unnecessary confined space entry.

For large scale biomass facilities operating complex infrastructure, drone inspection provides a safer, faster, and more commercially efficient solution for internal inspection activities.

Planning Your Next Confined Space Inspection

DJM Aerial Solutions provides specialist confined space drone inspections across the biomass, Energy from Waste, petrochemical, and power generation sectors throughout the UK.

We offer nationwide mobilisation, CAA authorised drone operations, confined space trained inspection teams, and high resolution inspection reporting aligned with industrial asset integrity programmes.

If you are planning shutdown inspections, investigating difficult access infrastructure, or reviewing internal asset condition, contact DJM Aerial Solutions to discuss how confined space drone technology can support your inspection strategy.

Menu
DJM
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.